You can request a free kit to test your drinking water for lead through the Free Residential Lead Testing Program. Lead does not have any color, odor, or taste.
The Department of Environmental Protection (DEP) will send you a test kit with instructions for collecting a sample of your drinking water.
This kit is for use in residences, including NYCHA residents, only and cannot be used to meet the lead testing requirements for day care centers or other businesses.
Shipping Details
Water Lead Test Kits are sent via regular mail and arrive within 10 business days of the request. The kits are distributed in a box the size of a shoebox and do not require a signature for delivery.
To return your kit, use the pre-paid label that comes in the box. The return process is free of charge. The box will not fit into the mailbox and must be returned to any U.S. Post Office or handed to your Postal Carrier.
Missing Label
If your return mailing label is lost or missing, call DEP's Lead Program Unit. The number is located at the bottom of the letter included with the kit.
For day care operators who want to test for lead, use the Child Care Permit and Operation page. All other businesses should hire a private laboratory.
New York City water is virtually lead-free when it is delivered from the City’s upstate reservoir system, and it meets or exceeds the highest quality standards. But solder, fixtures, and pipes found in the plumbing of some buildings or homes can cause water to absorb lead. This can increase potential for exposure.
Protective Steps to Reduce Lead Exposure
These simple steps can reduce your exposure to lead in water and protect your health:
Running the tap is the best way to flush lead from water in pipes.
Water Bill Impacts
Running tap water is a simple and inexpensive measure you can take to protect your family's health. It usually uses only a few gallons of water and costs approximately $1 per month.
More Information About Lead
Online
Learn more about lead in drinking water from NYC Department of Environmental Protection.
For questions about home water filtration.
By Email
By Phone
Drinking water questions:
City Response to Lead in Drinking Water
The City has an active program to reduce the amount of lead that dissolves into tap water, especially in homes with lead service lines or lead soldering in pipes.
The Department of Environmental Protection (DEP) carefully and continuously monitors and adjusts pH levels of water to a specific range that reduces the corrosiveness of the water.
DEP also adds phosphoric acid, a common food preservative, to create a protective film on pipes that reduces the release of metals, such as lead, from household plumbing. Since these treatments were started, the levels of lead in tap water have been going down.
Lead in City Water Supply
Lead is not found at elevated levels in New York City’s reservoirs or distribution system.
Sometimes elevated lead levels are found in tap water samples from corrosion of lead-containing plumbing from older buildings and homes (homes built before 1961 may have lead service lines and plumbing installed before 1987 may contain lead solder).
City owned buildings, including public schools, do not have lead service lines.
The Department of Parks is proactively testing all outdoor drinking fountains in City parks. This is part of a citywide effort to reduce New Yorkers' exposure to lead. When using a public fountain, it's good practice to let the water run for 30 seconds before drinking.
